View 19-219-T7D-AV1W1E-3T_839703.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.2mm Height)
19-219/T7D-AV1W1E/3T
Features
Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain within RoHS compliant version.
Descriptions
The 19-219 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use.
Device Selection Guide Part No.
19-219/T7D-AV1W1E/3T
Chip
Material InGaN
Emitted Color Pure White
Resin Color Yellow Diffused
Everlight Electronics Co., Ltd. Device No. : DSE-199-T03
http://www.everlight.com Prepared date: 18-Jun-2008
Rev.1
Page: 1 of 12
Prepared by: Ashley Kuo
Revision
:1
Release Date:2008-09-20 00:15:56.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
19-219/T7D-AV1W1E/3T
Package Outline Dimensions
1.6
0.8
Polarity
Recommend soldering pad
0.20.05
0.35
0.35
0.75
0.75
0.75
0.65
0.70
Cathode
0.70
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No. : DSE-199-T03
http://www.everlight.com Prepared date: 18-Jun-2008
0.70
Rev.1
Page: 2 of 12
Prepared by: Ashley Kuo
Revision
:1
Release Date:2008-09-20 00:15:56.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
19-219/T7D-AV1W1E/3T
Absolute Maximum Ratings (Ta=25
Parameter Reverse Voltage Forward Current Peak Forward Current IFP (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Pd ESD Topr Tstg Tsol 110 1000 -40 ~ +85 -40 ~ +90 Reflow Soldering : 260 Hand Soldering : 350 for 10 sec. for 3 sec. mW V 100 mA Symbol VR IF
)
Rating 5 30 Unit V mA
Electro-Optical Characteristics (Ta=25
Parameter
Luminous Intensity Viewing Angle Forward Voltage
)
Typ. ----130 --------Max. 1420 ----3.65 50 Unit mcd deg V A VR=5V IF=20mA Condition
Symbol Iv 2 1/2 VF IR
Min. 715 ----2.75 -----
Reverse Current
Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Forward Voltage 0.05V
Everlight Electronics Co., Ltd. Device No. : DSE-199-T03
http://www.everlight.com Prepared date: 18-Jun-2008
Rev.1
Page: 3 of 12
Prepared by: Ashley Kuo
Revision
:1
Release Date:2008-09-20 00:15:56.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
19-219/T7D-AV1W1E/3T
Bin Range Of Luminous Intensity
Bin V1 V2 W1 Min 715 900 1120 Max 900 1120 1420 mcd IF=20mA Unit Condition
Bin Range Of Forward Voltage
Group Bin 5 E 6 7 Min 2.75 3.05 3.35 Max 3.05 3.35 3.65 V IF=20mA Unit Condition
Notes: 1.Tolerance of Luminous Intensity
11% 2.Tolerance of Forward Voltage 0.05V
Everlight Electronics Co., Ltd. Device No. : DSE-199-T03
http://www.everlight.com Prepared date: 18-Jun-2008
Rev.1
Page: 4 of 12
Prepared by: Ashley Kuo
Revision
:1
Release Date:2008-09-20 00:15:56.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
19-219/T7D-AV1W1E/3T
Chromaticity Coordinates Specifications for Bin Grading Group Bin Code CIE_x 0.274 0.274 0.294 0.294 0.274 0.274 0.294 0.294 0.294 0.294 0.314 0.314 0.294 0.294 0.314 0.314 0.314 0.314 0.334 0.334 0.314 0.314 0.334 0.334 CIE_y 0.226 0.258 0.286 0.254 0.258 0.291 0.319 0.286 0.254 0.286 0.315 0.282 0.286 0.319 0.347 0.315 0.282 0.315 0.343 0.311 0.315 0.347 0.376 0.343
0.01). Condition
1
2
3 A 4
IF= 20mA
5
6 Notes:
1.The C.I.E. 1931 chromaticity diagram ( Tolerance
2.The products are sensitive to static electricity and care must be fully taken when handling products.
Everlight Electronics Co., Ltd. Device No. : DSE-199-T03
http://www.everlight.com Prepared date: 18-Jun-2008
Rev.1
Page: 5 of 12
Prepared by: Ashley Kuo
Revision
:1
Release Date:2008-09-20 00:15:56.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
19-219/T7D-AV1W1E/3T
CIE Chromaticity Diagram
Everlight Electronics Co., Ltd. Device No. : DSE-199-T03
http://www.everlight.com Prepared date: 18-Jun-2008
Rev.1
Page: 6 of 12
Prepared by: Ashley Kuo
Revision
:1
Release Date:2008-09-20 00:15:56.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
19-219/T7D-AV1W1E/3T
Typical Electro-Optical Characteristics Curves
Spectrum Distribution Ta=25C Relative luminous intensity ( ) % Forward Current vs. Forward Voltage
Ta=25C
Wavelength (nm) Luminous Intensity vs. Ambient Temperature Relative luminous intensity ( ) % Relative luminous intensity ( ) %
Forward Current I F (mA)
Forward Voltage VF (V) Luminous Intensity vs Forward Current Ta=25
f=1KHz Duty=1/10
Ambient Temperature Ta (C) Forward Current Derating Curve
Forward Current I F (mA) Radiation Diagram
Ta=25
Forward Current F (mA) I
Ambient Temperature Ta (C)
Everlight Electronics Co., Ltd. Device No. : DSE-199-T03
http://www.everlight.com Prepared date: 18-Jun-2008
Rev.1
Page: 7 of 12
Prepared by: Ashley Kuo
Revision
:1
Release Date:2008-09-20 00:15:56.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
19-219/T7D-AV1W1E/3T
Label explanation
CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No. : DSE-199-T03 http://www.everlight.com Prepared date: 18-Jun-2008 Rev.1 Page: 8 of 12
Prepared by: Ashley Kuo
Revision
:1
Release Date:2008-09-20 00:15:56.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
19-219/T7D-AV1W1E/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No. : DSE-199-T03
http://www.everlight.com Prepared date: 18-Jun-2008
Rev.1
Page: 9 of 12
Prepared by: Ashley Kuo
Revision
:1
Release Date:2008-09-20 00:15:56.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
19-219/T7D-AV1W1E/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level 90% LTPD 10%
No. 1
Items Reflow Soldering
Test Condition 5 Temp. : 260 Min. 5sec. 15min H : +100 5 min 15min L : -40 5min H : +100 10 sec 5min L : -10 Temp. : 100 Temp. : -40 IF = 20 mA 85 / 85%RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.
Ac/Re 0/1
2
Temperature Cycle
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles
22 PCS.
0/1
4 5 6 7
1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No. : DSE-199-T03
http://www.everlight.com Prepared date: 18-Jun-2008
Rev.1
Page: 10 of 12
Prepared by: Ashley Kuo
Revision
:1
Release Date:2008-09-20 00:15:56.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
19-219/T7D-AV1W1E/3T
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. or less and 60% RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30
If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60 5 3. Soldering Condition 3.1 Pb-free solder temperature profile for 24 hours.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No. : DSE-199-T03
http://www.everlight.com Prepared date: 18-Jun-2008
Rev.1
Page: 11 of 12
Prepared by: Ashley Kuo
Revision
:1
Release Date:2008-09-20 00:15:56.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
19-219/T7D-AV1W1E/3T
4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350
for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No. : DSE-199-T03
http://www.everlight.com Prepared date: 18-Jun-2008
Rev.1
Page: 12 of 12
Prepared by: Ashley Kuo
Revision
:1
Release Date:2008-09-20 00:15:56.0 Expired Period: Forever
LifecyclePhase:

▲Up To Search▲

Price & Availability of 19-219-T7D-AV1W1E-3T

	To Download 19-219-T7D-AV1W1E-3T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .